Flat collector PIX 2.0 with connector
- Collector surface 2.0m
- Absorber surface 1.79m
- Bath's casing
- High selective layer of absorber
- Absorber system: double harp
- Solar temper - 4mm
|
2 units
|
3 units
|
4 units
|
|
Connection set
- Cross-connector with dip's funnel for temperature sensor and manual air vent (1 unit)
- Two straight connectors, self-clamp (2 units)
- Clamp-elbow (1 unit)
- Connector (1 unit)
- Flexible tube made of stainless steel, insulated (2 units)
- Teflon gasket (1 unit)
|
1 unit
|
1 unit
|
1 unit
|
|
Pump group GPS 40
- Wilo pump ST15/7 (1 unit)
- 2 thermometers, 2 ball valves, 2 check valves, manometer, safety valve air separator with manual air-vent
- Rothameter with 2 filling-drain valves
- Wall fitting it (1 set)
- Montage lever of expansion vessel (1 unit)
- Flexible tube made of stainless steel L=0.5m (1 unit)
- Brass connector (connection of expansion vessel and flexible tube)
- Clamp-connector Φ22mm (4 units)
|
1 unit
|
1 unit
|
1 unit1
|
|
Solar tank
|
1 unit x 250l
|
1 unit x 300l
|
1 unit x 400l
|
|
Solar control board RSS 2
- Cooling function, fluent regulation of pump, display
- Regulator
- Collector sensor (1 unit)
- Water tank temperature sensor (1 unit)
- Dip's funnel of sensor temperature
|
1 unit
|
1 unit
|
1 unit1
|
|
Expansion vessel
|
1 unit x 18l
|
1 unit x 25l
|
1 unit x 35l
|
|
Solar liquid - extract 10l
|
1 unit
|
2 units
|
2 units
|
|
Manual pump
|
1 unit
|
1 unit
|
1 unit
|
|
Thermal insulation
- Length 20mm
- Inner diameter 18mm
- Thickness 13mm
|
1 unit
|
1 unit
|
1 unit
|
|
Fitting bracket for sloping tile roof
- Made of stainless steel and aluminium
Kits for other kinds of roofs must be ordered separately.
|
1 unit
|
1 unit
|
1 unit
|
|